SH7052 datasheet(747/919 Pages) RENESAS

747 / 919 page

721

H'00000

H'01000

H'02000

H'03000

H'04000

H'05000

H'06000

H'07000

H'08000

H'3FFFF

Flash memory

EB8 to EB11

EB0

EB1

EB2

EB3

EB4

EB5

EB6

EB7

H'FFFF8000

H'FFFF8FFF

H'FFFFAFFF(SH7052F)

H'FFFFBFFF(SH7053F)

On-chip RAM

This area can be accessed

from both the RAM area

and flash memory area

Figure 20.18 Example of RAM Overlap Operation

Example in which Flash Memory Block Area EB0 is Overlapped

1. Set bits RAMS and RAM2 to RAM0 in RAMER to 1, 0, 0, 0, to overlap part of RAM onto the

area (EB0) for which real-time programming is required.

2. Real-time programming is performed using the overlapping RAM.

3. After the program data has been confirmed, the RAMS bit is cleared, releasing RAM overlap.

4. The data written in the overlapping RAM is written into the flash memory space (EB0).

Notes: 1. When the RAMS bit is set to 1, program/erase protection is enabled for all blocks

regardless of the value of RAM2 to RAM0 (emulation protection). In this state, setting

the P1 or E1 bit in flash memory control register 1 (FLMCR1) will not cause a

transition to program mode or erase mode. When actually programming or erasing a

flash memory area, the RAMS bit should be cleared to 0.

2. A RAM area cannot be erased by execution of software in accordance with the erase

algorithm while flash memory emulation in RAM is being used.

SH7052 bảng dữ liệu(PDF) 747 Page - Renesas Technology Corp

SH7052 bảng dữ liệu(HTML) 747 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL