| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
ORSPI4 bảng dữ liệu(PDF) 121 Page - Lattice Semiconductor |
|
|
|||||||||||||||||||||||||||||
ORSPI4 bảng dữ liệu(HTML) 121 Page - Lattice Semiconductor |
|
121 / 263 page ![]() Lattice Semiconductor ORCA ORSPI4 Data Sheet 121 Figure 59. Mixed Rate Transmit Clocking for a Single Block Receive Clock Source Selection and Recommended Clock Distribution In the receive path, one clock per bank of four channels, called RCK78, is sent to the FPGA logic. The control reg- ister bits RCKSEL[0:1] are used to select the clock source for these clocks. The selection of the source for RCK78 is controlled by these bits as shown in Table 33. Table 33. RCK78 Source Selection In the receive channel alignment bypass mode, the data and recovered clocks for the four channels are indepen- dent. The data for each channel are synchronized to the recovered clock from that channel. RCKSEL0 RCKSEL1 Clock Source 0 0 Channel A 1 0 Channel B 0 1 Channel C 1 1 Channel C Common Logic Channel A Channel B Channel D Channel C REFCLK[P:N] 2 100 MHz TCK78 TSYS_CLK_A TSYS_CLK_C TSYS_CLK_B TSYS_CLK_D FPGA Logic Two Channels of 2.0 Gbits/s (Full-Rate) Outgoing Serial Data Channel A Selected as Clock Source 50 MHz ÷ 2 25 MHz Two Channels of 1.0 Gbits/s (Half-Rate) Outgoing Serial Data |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |