| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
TMP93CS41 bảng dữ liệu(PDF) 103 Page - Toshiba Semiconductor |
|
|
|||||||||||||||||||||||||||||
TMP93CS41 bảng dữ liệu(HTML) 103 Page - Toshiba Semiconductor |
|
103 / 248 page ![]() TMP93CS40/TMP93CS41 20004-02-10 93CS40-101 4. Comparator A comparator compares the value in the up counter with the values to which the timer register is set. When they match, the up counter is cleared to zero and an interrupt signal (INTT0 and INTT1) is generated. If the timer flip-flop inversion is enabled, the timer flip-flop is inverted at the same time. 5. Timer flip-flop The timer flip-flop (TFF1) is a flip-flop inverted by the match detect signal (8-bit comparator output). Inverting is enabled or disabled by the timer flip-flop control register TFFCR<TFF1IE>. After a reset operation, the value of TFF1 is undefined. Writing “01” or “10” to TFFCR<TFF1C1:0> sets “0” or “1” to TFF1. Additionally, writing 00 to this bit inverts the value of TFF1. (Software inversion.) The value in TFF1 can be output to the TO1 pin (also used as P71). When using the TFF1 contents as the timer output, the timer flip-flop should be set by the port 7 function register P7FC beforehand. |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |