PM7347 datasheet(39/341 Pages) PMC

39 / 341 page

S/UNI®-JET Data Sheet

Released

Proprietary and Confidential to PMC-Sierra, Inc., and for its Customers’ Internal Use

Document ID: PMC-1990267, Issue 3

Pin Name

Type

No.

Function

TPOHFP

TFPO

TMFPO

TGAPCLK

Output

W14

The Transmit Path Overhead Frame Position (TPOHFP)

is valid when the FRMRONLY bit in the S/UNI-JET

Configuration 1 Register is logic zero. The TPOHFP

output locates the individual PLCP path overhead bits in

the transmit overhead data stream, TPOH. TPOHFP is

logic one while bit 1 (the most significant bit) of the path

user channel octet (F1) is present in the TPOH stream.

TPOHFP is updated on the falling edge of TPOHCLK.

The Framer Transmit Frame Pulse/Multi-frame Pulse

Reference (TFPO/TMFPO) is valid when the S/UNI-JET

is configured as a DS3, E3, or J2 framer for non-ATM

applications by setting the FRMRONLY bit in the S/UNI-

JET Configuration 1 Register to logic one and the

TXGAPEN bit in the S/UNI-JET Configuration Register to

logic zero.

TFPO pulses high for 1 out of every 85 clock cycles

when configured for DS3, giving a free-running mark for

all overhead bits in the frame. TFPO pulses high for 1 out

of every 1536 clock cycles when configured for G.751

E3, giving a free-running reference G.751 indication.

TFPO pulses high for 1 out of every 4296 clock cycles

when configured for G.832 E3, giving a free-running

reference G.832 frame indication. TFPO pulses high for

1 out of every 789 clock cycles when configured for J2,

giving a free-running reference frame indication.

TMFPO pulses high for 1 out of every 4760 clock cycles

when configured for DS3, giving a free-running reference

M-frame indication. TMFPO pulses high for 1 out of

every 3156 clock cycles when configured for J2, giving a

free-running reference multi-frame indication. TMFPO

behaves the same as TFPO for E3 applications.

TFPO and TMFPO are updated on the rising edge of

TICLK or RCLK if loop-timed.

The Framer Gapped Transmit Clock (TGAPCLK) is valid

when the S/UNI-JET is configured as a DS3, E3, or J2

framer for non-ATM applications by setting the

FRMRONLY bit in the S/UNI-JET Configuration 1

Configuration 2 Register.

TGAPCLK is derived from the transmit reference clock

TICLK or from the receive clock if loop-timed. The

overhead bit (gapped) positions are generated internal to

the device. TGAPCLK is held high during the overhead

bit positions. This clock is useful for interfacing to devices

which source payload data only.

TGAPCLK is used to sample TDATI.

PM7347 bảng dữ liệu(PDF) 39 Page - PMC-Sierra, Inc

PM7347 bảng dữ liệu(HTML) 39 Page - PMC-Sierra, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL