CLRC663 datasheet(37/177 Pages) NXP

tên linh kiện	CLRC663

Giải thích chi tiết về linh kiện	High performance multi-protocol NFC frontend CLRC663 and CLRC663 plus

PDF	177 Pages

Scroll/Zoom	100%

nhà sản xuất	NXP [NXP Semiconductors]

Trang chủ	http://www.nxp.com

Logo

37 / 177 page

NXP Semiconductors

CLRC663

High performance multi-protocol NFC frontend CLRC663 and CLRC663 plus

WaterLevel is one single value defining both HiAlert (counting from the FIFO top) and LoAlert (counting from the

FIFO bottom). The CLRC663 can generate an interrupt signal if:

• LoAlertIRQEn in register IRQ0En is set to logic 1 it will activate pin IRQ when LoAlert in the register

FIFOControl changes to 1.

• HiAlertIRQEN in register IRQ0En is set to logic 1 it will activate pin IRQ when HiAlert in the register

FIFOControl changes to 1.

The bit HiAlert is set to logic 1 if maximum water level bytes (as set in register WaterLevel) or less can be stored

in the FIFO-buffer. It is generated according to the following equation:

(2)

The bit LoAlert is set to logic 1 if water level bytes (as set in register WaterLevel) or less are actually stored in

the FIFO-buffer. It is generated according to the following equation:

(3)

CLRC663

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 5.3 — 3 January 2024

37 / 177

CLRC663 bảng dữ liệu(PDF) 37 Page - NXP Semiconductors