| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
TSS461C bảng dữ liệu(PDF) 42 Page - ATMEL Corporation |
|
|
|||||||||||||||||||||||||||||
TSS461C bảng dữ liệu(HTML) 42 Page - ATMEL Corporation |
|
42 / 57 page ![]() 42 TSS461C 4193G–AUTO–12/04 Messages Types There are 5 basic message types defined in the TSS461C. Two of them (transmit and receive message types) correspond to the normal frame, and the rest correspond to the different versions of reply frames. To transmit a normal data frame on the VAN bus, the user must program an identifier as a Transmit Message. The TSS461C will then transmit this message on the bus until it has succeeded or the retry count is exceeded. The opposite of the transmit message type is the Receive Message type. This message type will not generate any frames on the bus. Instead, it will listen to the bus until a frame passes that matches its identifier, with the mask taken into account, and then receive the data in that frame. The data received will be stored in the message buffer and the length of the message received is stored in the first byte of the message buffer. The actual identifier received is stored in the identifier register itself. This identifier may differ from the identifier specified in the register due to the effect of the mask register. Normally, this should not interfere with the next identifier comparison since the bits that may differ are masked via the mask register. The Reply Request Message type is a demand to transmit on the VAN bus a reply request. When this message type is programmed, three things can happen. First, no other modules on the bus responded with an in-frame reply, in this case the TSS461C will set the message type to the after transmission state. When this message type is programmed, the TSS461C will listen on the bus for a deferred reply frame matching this identifier, without transmitting the reply request. Transmit Message RNW RTR CHTx CHRx Initial Setup 0 0 0 Don’t Care After Transmission 0 0 1 Unchanged Receive Message RNW RTR CHTx CHRx Initial Setup 0 1 Don’t Care 0 After Transmission 0 1 Unchanged 1 Reply Request Message RNW RTR CHTx CHRx Initial Setup 1 1 0 0 After Transmission (Waiting for reply) 11 1 0 After Reception (of reply) 11 1 1 |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |