| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
CS5320 bảng dữ liệu(PDF) 74 Page - Applied Micro Circuits Corporation |
|
|
|||||||||||||||||||||||||||||
CS5320 bảng dữ liệu(HTML) 74 Page - Applied Micro Circuits Corporation |
|
74 / 160 page ![]() S5320 – PCI Match Maker: Operation Registers 74 DS1656 AMCC Confidential and Proprietary Revision 5.03 – June 14, 2006 Data Sheet Table 35. Interrupt Control Status Register Bit Description 31:24 Reserved. Always zero. 23 Interrupt Asserted. This read-only status bit indicates that one or more interrupt conditions are present. This bit is the OR of the interrupt sources described by bits 20, 17 and 16 of this register. 22:21 Reserved. Always zero. 20 BIST. Built-In Self-Test Interrupt. This interrupt occurs when a self test is initiated by the PCI interface by writing to the PCI configuration register BIST. This bit will stay set until cleared by writing a 1 to this location. Self test completion codes may be passed to the PCI BIST register by writing to the ARCR register. 19:18 Reserved. Always zero. 17 Outgoing Mailbox Interrupt. This bit can be set when the mailbox is read by the PCI interface. This bit operates as read or write 1 clear. A write with the data as 1 will cause this bit to be reset; a write with the data as 0 will not change the state of this bit. 16 Incoming Mailbox Interrupt. This bit can be set when the mailbox is written by the PCI interface. This bit oper- ates as read or write 1 clear. A write with the data as 1 will cause this bit to be reset; a write with the data as 0 will not change the state of this bit. 15:13 Reserved. Always zero. 12 Enable Outgoing Mailbox Interrupt. This bit allows a PCI read of the outgoing mailbox register to produce an Add-On interrupt. This bit is read/write. 11:10 Hardwired to 11. 9:8 Outgoing Mailbox Byte Interrupt Select. This field selects which byte of the mailbox is to cause the interrupt. [00]b selects byte 0, [01]b selects byte 1, [10]b selects byte 2, and [11]b selects byte 3. This field is read/write. 7:5 Reserved. Always zero. 4 Enable Incoming Mailbox Interrupt. This bit allows a write from the PCI bus to the incoming mailbox register to produce an Add-On interrupt. This bit is read/write. 3:2 Hardwired to 1. 1:0 Incoming Mailbox Byte Interrupt Select. This field selects which byte of the mailbox is to cause the interrupt. 00b selects byte 0, 01b selects byte 2, and 11b selects byte 3. This field is read/write. |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |