HC05RC16GRSSLASHD datasheet(104/122 Pages) NXP

104 / 122 page

Electrical Speciﬁcations

General Release Specification

MC68HC05RC16 — Rev. 3.0

Electrical Specifications

11.3 Maximum Ratings

Maximum ratings are the extreme limits to which the MCU can be

exposed without permanently damaging it.

The MCU contains circuitry to protect the inputs against damage from

high static voltages; however, do not apply voltages higher than those

shown in the table below. Keep V

IN and VOUT within the range

SS ≤ (VIN or VOUT) ≤ VDD. Connect unused inputs to the appropriate

voltage level, either V

SS or VDD.

NOTE:

This device is not guaranteed to operate properly at the maximum

ratings. Refer to 11.6 DC Electrical Characteristics (5.0 Vdc) and 11.7

DC Electrical Characteristics (2.2 Vdc) for guaranteed operating

conditions.

Rating

Symbol

Value

Unit

Supply Voltage

VDD

–0.3 to +7.0

Burn-In Mode (IRQ Pin Only)

VIN

VSS –0.3

2 x VDD + 0.3

Current Drain Per Pin Excluding VDD and VSS

I25

Operating Junction Temperature

+150

°C

Storage Temperature Range

Tstg

–65 to +150

°C

Freescale Semiconductor, Inc.

For More Information On This Product,

Go to: www.freescale.com

HC05RC16GRS/D bảng dữ liệu(PDF) 104 Page - NXP Semiconductors

HC05RC16GRS/D bảng dữ liệu(HTML) 104 Page - NXP Semiconductors

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL