| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
STM32H7A3VG bảng dữ liệu(PDF) 16 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STM32H7A3VG bảng dữ liệu(HTML) 16 Page - STMicroelectronics |
|
16 / 237 page ![]() • Provide intermediate voltage level to supply the internal voltage regulator (LDO) – The SMPS step-down converter operating modes follow the device system operating modes (Run, Stop, Standby). – The SMPS step-down converter output equals 1.8 V or 2.5 V according to the selected step-down level • Provide an external supply – The SMPS step-down converter is forced to external operating mode – The SMPS step-down converter output equals 1.8 V or 2.5 V according to the selected step-down level The 1.8 V or 2.5 V SMPS step-down converter output voltage imposes a minimum VDDSMPS supply of 2.5 V or 3.3 V, respectively. It defines indirectly the minimum VDD supply and I/O level. 3.6 Low-power modes There are several ways to reduce power consumption on STM32H7A3xI/G: • Decrease dynamic power consumption by slowing down the system clocks even in Run mode and individually clock gating the peripherals that are not used. • Save power consumption when the CPU is idle, by selecting among the available low-power mode according to the user application needs. This allows achieving the best compromise between short startup time, low-power consumption, as well as available wakeup sources. The devices feature several low-power modes: • System Run with CSleep (CPU clock stopped) • Autonomous with CD domain in DStop (CPU and CPU Domain bus matrix clocks stopped) • Autonomous with CD domain in DStop2 (CPU and CPU Domain bus matrix clocks stopped, CPU domain in retention mode) • System Stop (SRD domain clocks stopped) and CD domain in DStop (CPU and CPU Domain bus matrix clocks stopped) • System Stop (SRD domain clocks stopped) and CD domain in DStop2 (CPU and CPU Domain bus matrix clocks stopped, CPU domain in retention mode) • Standby (System, CD and SRD domains powered down) CSleep and CStop low-power modes are entered by the MCU when executing the WFI (Wait for Interrupt) or WFE (Wait for Event) instructions, or when the SLEEPONEXIT bit of the Cortex®-M7 core is set after returning from an interrupt service routine. The CPU domain can enter low-power mode (DStop or DStop2) when the processor, its subsystem and the peripherals allocated in the domain enter low-power mode. If part of the domain is not in low-power mode, the domain remains in the current mode. Finally the system can enter Stop or Standby when all EXTI wakeup sources are cleared and the power domains are in DStop or DStop2 mode. Table 2. System vs domain low-power mode System power mode CD domain power mode SRD domain power mode Run DRun/DStop/DStop2 DRun Stop DStop/DStop2 DStop Standby Standby Standby Some GPIO pins can be used to monitor CPU and domain power states: Table 3. Overview of low-power mode monitoring pins Power state monitoring pins Description PWR_CSLEEP CPU clock OFF PWR_CSTOP CPU domain in low-power mode PWR_NDSTOP2 CPU domain retention mode selection STM32H7A3xI/G Low-power modes DS13195 - Rev 8 page 16/237 |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |