EKTF6708 datasheet(36/158 Pages) EMC

36 / 158 page

eKTF6708

8-Bit Microcontroller



IC Product Specification (V1.2) 03.12.2020

(This specification is subject to change without prior notice)

Bit 0 (I2CTIE): I

2C Interface Tx interrupt enable bit

0: Disable interrupt

1: Enable interrupt

NOTE

If the interrupt mask and instruction

“ENI” are enabled, the program counter will jump into

the corresponding interrupt vector when the corresponding status flag is set.

6.1.26 Bank 0 R1F: (Reserved)

6.1.27 Bank 0 R20: IMR6 (Interrupt Mask Register 6)

Bit 7

Bit 6

Bit 5

Bit 4

Bit 3

Bit 2

Bit 1

Bit 0

SHIE

TKCIE

TKERRIE

TKIE

R/W

Bit 7 (SHIE): SHSF Interrupt Enable Bit.

0: Disable SHSF interrupt

1: Enable SHSF interrupt

Bits 6~4,2: Not used, set to "0" all the time.

Bit 3 (TKCIE): TKCSF/TKTOSF Interrupt Enable Bit.

0: Disable TKCSF/TKTOSF interrupt

1: Enable TKCSF/TKTOSF interrupt

Bit 1 (TKERRIE): TKPESF /TKOESF Interrupt Enable Bit.

0: Disable TKPESF /TKOESF interrupt

1: Enable TKPESF /TKOESF interrupt

Bit 0 (TKIE): TKIE Interrupt Enable Bit.

0: Disable TKSF interrupt

1: Enable TKSF interrupt

6.1.28 Bank 0 R21: WDTCR (Watchdog Timer Control Register)

Bit 7

Bit 6

Bit 5

Bit 4

Bit 3

Bit 2

Bit 1

Bit 0

WDTE

FSSF

PSWE

WPSR2

WPSR1

WPSR0

R/W

Bit 7 (WDTE): Watchdog Timer enable bit. WDTE is both readable and writable.

0: Disable WDT

1: Enable WDT

Bit 6 (FSSF): Fs Stable Flag bit

EKTF6708 bảng dữ liệu(PDF) 36 Page - ELAN Microelectronics Corp

EKTF6708 bảng dữ liệu(HTML) 36 Page - ELAN Microelectronics Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL