| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
ATPL230A bảng dữ liệu(PDF) 114 Page - ATMEL Corporation |
|
|
|||||||||||||||||||||||||||||
ATPL230A bảng dữ liệu(HTML) 114 Page - ATMEL Corporation |
|
114 / 122 page ![]() ATPL230A [DATASHEET] Atmel-43053J-ATPL230A-Datasheet_22-Sep-16 114 10.7 Power On Considerations During power-on, PLL INIT pin should be tied to ground during 4 μs at least, in order to ensure proper system start up. After releasing PLL INIT, the system will start no later than 612 μs. After power-up system can be restarted by means of low active pulse (min 1.65 μs) in ARST or SRST. System full operation starts after 410 μs (ARST pulse) or after 0.9 μs (SRST pulse). In case of simultaneous tie down of more than one initialization pin the longest time for operation must be respected. Figure 10-6. PLL INIT initialization diagram FULL OPERATION PLL INIT ARST SRST > 4us > 612us > 410us > 0.9us > 1.65us* > 1.65us* SYSTEM (*) 1.65us = 33*tclk |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |