| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
LAN9220 bảng dữ liệu(PDF) 49 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
LAN9220 bảng dữ liệu(HTML) 49 Page - Microchip Technology |
|
49 / 142 page ![]() 2006-2017 Microchip Technology Inc. DS00002417A-page 49 LAN9220 3.12.6.3 TX Example 3 In this example a single, 111-Byte Ethernet packet will be transmitted with a TX checksum. This packet is divided into four buffers. The four buffers are as follows: Buffer 0: • 4-Byte “Data Start Offset” • 4-Byte Checksum Preamble • 16-Byte “Buffer End Alignment” Buffer 1: • 7-Byte “Data Start Offset” • 79-Bytes of payload data • 16-Byte “Buffer End Alignment” Buffer 2: • 0-Byte “Data Start Offset” • 15-Bytes of payload data • 16-Byte “Buffer End Alignment” Buffer 3: • 10-Byte “Data Start Offset” • 17-Bytes of payload data • 16-Byte “Buffer End Alignment” Figure 3-21, "TX Example 1" illustrates the TX command structure for this example, and also shows how data is passed to the TX data FIFO. Note: In order to perform a TX checksum calculation on the associated packet, bit 14 (CK) of the TX Command ‘B’ must be set in conjunction with bit 13 (FS) of TX Command ‘A’ and bit 16 (TXCOE_EN) of the COE_CR register. For more information, refer to Section 3.6.3, "Transmit Checksum Offload Engine (TXCOE)". |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |