STA559BW datasheet(23/67 Pages) STMICROELECTRONICS

23 / 67 page

DocID18190 Rev 2

23/67

STA559BW

The relationship between the input clock and the input sample rate is determined by both

the MCSx and the IR (input rate) register bits. The MCSx bits determine the PLL factor

generating the internal clock and the IR bit determines the oversampling ratio used

internally.

Interpolation ratio select

The STA559BW has variable interpolation (oversampling) settings such that internal

processing and FFX output rates remain consistent. The first processing block interpolates

by either 2-times or 1-time (pass-through) or provides a 2-times downsample. The

oversampling ratio of this interpolation is determined by the IR bits.

Thermal warning recovery bypass

Table 10. Input sampling rates

Input sample rate

fs (kHz)

MCS[2:0]

101

100

011

010

001

000

32, 44.1, 48

576 * fs

128 * fs

256 * fs

384 * fs

512 * fs

768 * fs

88.2, 96

64 * fs

128 * fs

192 * fs

256 * fs

384 * fs

176.4, 192

32 * fs

64 * fs

96 * fs

128 * fs

192 * fs

Table 11. Internal interpolation ratio

Bit

R/W

RST

Name

Description

4:3

R/W

IR [1:0]

Selects internal interpolation ratio based on input I²S

sample frequency

Table 12. IR bit settings as a function of input sample rate

Input sample rate fs (kHz)

1st stage interpolation ratio

2-times oversampling

44.1

2-times oversampling

88.2

Pass-through

176.4

2-times downsampling

192

2-times downsampling

Table 13. Thermal warning recovery bypass

Bit

R/W

RST

Name

Description

5R/W

TWRB

0: thermal warning recovery enabled

1: thermal warning recovery disabled

STA559BW bảng dữ liệu(PDF) 23 Page - STMicroelectronics

STA559BW bảng dữ liệu(HTML) 23 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67

bảng dữ liệu tải về

Link URL