PC87365 datasheet(67/215 Pages) NSC

67 / 215 page

2.0 Device Architecture and Configuration (Continued)

www.national.com

2.15.3

KBC Configuration Register

This register is reset by hardware to 40h.

Location:

Index F0h

Type:

R/W

Usage Hints:

To change the clock frequency of the KBC:

1. Disable the KBC logical devices.

2. Change the frequency setting.

3. Enable the KBC logical devices.

4. Before swapping between the KBD and Mouse interface pins, disable the KBC logical devices and both pin sets. After

swapping, the software should issue a synchronization command to the KBD and mouse through the KBC to regain syn-

chronization with these devices.

Bit

76543210

Name

KBC Clock Source

Reserved

Swap

Reserved

TRI-STATE

Control

Reset

01000000

Required

Bit

Description

7-6

KBC Clock Source. The clock source can be changed only when the KBC is inactive (disabled).

Bits

7 6

Source

0 0

8 MHz

0 1

12 MHz (default)

1 0

16 MHz

1 1

Reserved

5-4

Reserved.

Swap. This bit swaps between the KBD and Mouse interface pins.

0: KBCLK and KBDAT are KBD interface; MCLK and MDAT are Mouse interface (default)

1: KBCLK and KBDAT are Mouse interface, MCLK and MDAT are KBD interface

2-1

Reserved.

TRI-STATE Control. If KBD is inactive (disabled) when this bit is set, the KBD pins (KBCLK and KBDAT) are in TRI-

STATE. If Mouse is inactive (disabled) when this bit is set, the Mouse pins (MCLK and MDAT) are in TRI-STATE.

0: Disabled (default)

1: Enabled

PC87365 bảng dữ liệu(PDF) 67 Page - National Semiconductor (TI)

PC87365 bảng dữ liệu(HTML) 67 Page - National Semiconductor (TI)

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL