công cụ tìm kiếm bảng dữ liệu linh kiện điện tử
  Vietnamese  ▼
ALLDATASHEET.VN

X  

MT312C/CG bảng dữ liệu(PDF) 26 Page - Zarlink Semiconductor Inc

tên linh kiện MT312C/CG
Giải thích chi tiết về linh kiện  Satellite Channel Decoder
PDF  90 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
nhà sản xuất  ZARLINK [Zarlink Semiconductor Inc]
Trang chủ  http://www.zarlink.com
Logo ZARLINK - Zarlink Semiconductor Inc

MT312C/CG bảng dữ liệu(HTML) 26 Page - Zarlink Semiconductor Inc

Back Button MT312C/CG Datasheet HTML 22Page - Zarlink Semiconductor Inc MT312C/CG Datasheet HTML 23Page - Zarlink Semiconductor Inc MT312C/CG Datasheet HTML 24Page - Zarlink Semiconductor Inc MT312C/CG Datasheet HTML 25Page - Zarlink Semiconductor Inc MT312C/CG Datasheet HTML 26Page - Zarlink Semiconductor Inc MT312C/CG Datasheet HTML 27Page - Zarlink Semiconductor Inc MT312C/CG Datasheet HTML 28Page - Zarlink Semiconductor Inc MT312C/CG Datasheet HTML 29Page - Zarlink Semiconductor Inc MT312C/CG Datasheet HTML 30Page - Zarlink Semiconductor Inc Next Button
Zoom Inzoom in Zoom Outzoom out
 26 / 90 page
background image
MT312 Tuner Control
26
Pin 45 = DATA2, this is a transparent, bi-directional connection to the primary DATA1.
Pin 44 = CLK2, this is a transparent, bi-directional connection to the primary CLK1.
If B6 = 0 then: GPP DIR[2:0] defines the input/output conditions of the GPP pins and:
If a pin[n] is defined as output then:
GPP PIN[n] high forces GPP[n] pin high
GPP PIN[n] low forces GPP[n] pin low
If a pin[n] is defined as input then:
GPP[n] pin high sets bit GPP PIN[n] high
GPP[n] pin low sets bit GPP PIN[n ] low
Allocation of GPP PIN[2:0] is:
GPP PIN[2] = DiSEqC™ v2.2 input, 3 wire bus Enable or can be used for any other application
GPP PIN[1] = DATA2 or 3 wire bus Data
GPP PIN[0] = CLK2 or 3 wire bus Clock
The register default state of 20 hex allows the GPP[2] pin to be used for the 3 wire bus Enable line and to be
kept low at all times, except when programming the Synthesiser.
When GPP[2] pin is used for DiSEqC™ v2.2 input, the GPP CTRL register will need to be set to zero after
every full reset to make GPP[2] an input.
4.4.2 FR LIM: Frequency Limit. Register 37 (R/W)
B7:
Reserved.
Must be set low.
FR LIM[6:0] Frequency search range MHz x 8. This unsigned 7 bit number represents a search range of +/-0
to +/- 15.875MHz. Default value 30 (hex) = +/- 6MHz.
NAME
ADR
B7
B6
B5
B4
B3
B2
B1
B0
Def
hex
FR LIM
37
Reserved
FR LIM[6:0] - Freq. Limit in MHz
R/W
30



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90


bảng dữ liệu tải về

Go To PDF Page


Link URL



Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không?  [ DONATE ] 

Alldatasheet là   |   Quảng cáo   |   Liên lạc với chúng tôi   |   Chính sách bảo mật   |   Liên kết đến bảng dữ liệu    |   Trao đổi link   |   Tìm kiếm theo nhà sản xuất
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com