TMS320C6472ECTZ datasheet(178/269 Pages) TI1

178 / 269 page

TMS320C6472

SPRS612G

– JUNE 2009 – REVISED JULY 2011

www.ti.com

7.12 I2C Peripheral

The inter-integrated circuit (I2C) module provides an interface between a C64x+ DSP and other devices

compliant with Philips Semiconductors Inter-IC bus

™ (I2C bus) specification version 2.1 and connected by

way of an I2C-bus. External components attached to this 2-wire serial bus can transmit/receive up to 8-bit

data to/from the DSP through the I2C module.

7.12.1 I2C Device-Specific Information

The C6472 device includes an I2C peripheral module (I2C). NOTE: when using the I2C module, ensure

there are external pullup resistors on the SDA and SCL pins.

The I2C modules on the C6472 device may be used by the DSP to control local peripherals ICs (DACs,

ADCs, etc.) or may be used to communicate with other controllers in a system or to implement a user

interface.

The I2C port supports:

•

Compatible with Philips I2C Specification Revision 2.1 (January 2000)

•

Fast Mode up to 400 Kbps (no fail-safe I/O buffers)

•

Glitch filter to suppress glitches 50 ns or shorter

•

7- and 10-Bit Device Addressing Modes

•

Multi-Master (Transmit/Receive) and Slave (Transmit/Receive) Functionality

•

Events: DMA, Interrupt, or Polling

•

Slew-Rate Limited Open-Drain Output Buffers

Figure 7-38 is a block diagram of the I2C module.

178

C64x+ Peripheral Information and Electrical Specifications

Submit Documentation Feedback

Product Folder Link(s) :TMS320C6472

TMS320C6472ECTZ bảng dữ liệu(PDF) 178 Page - Texas Instruments