FT232H datasheet(52/65 Pages) FTDI

tên linh kiện	FT232H

Giải thích chi tiết về linh kiện	FT232H Single Channel Hi-Speed USB to Multipurpose UART/FIFO IC

PDF	65 Pages

Scroll/Zoom	100%

nhà sản xuất	FTDI [Future Technology Devices International Ltd.]

Trang chủ	http://www.ftdichip.com

Logo

52 / 65 page

Document No.: FT_000288

FT232H SINGLE CHANNEL HI-SPEED USB TO MULTIPURPOSE UART/FIFO IC

Datasheet Version 1.81

Clearance No.: FTDI #199

6.2 USB Self Powered Configuration

Self Powered application example 1: Self powered configuration running on 5V.

Figure 6.2 Self Powered Configuration Example 1

Figure 6.2 illustrates the FT232H in a typical USB self powered configuration. A USB self powered device

gets its power from its own external power supply which is connected to VREGIN. In this application the

VREGIN is the +5V input to the on chip +3.3V/1.8V regulator. The output of the on chip LDO regulator

(+1.8V) drives pin 38, VCORE and pin 37, VCCA. The output of the on chip LDO regulator (3.3V) supplies

3.3V to the VCCIOs, VPLL and VPHY through VCCD.

Please note that when the FT232H running on +5V (VREGIN), the VCCD becomes an output.

Note that in this set-up, the EEPROM should be configured for self-powered operation and the option

“suspend on ACBUS7 low” is enabled in FT_Prog. This configuration uses the ACBUS7 pin, when this

function is enabled ACBUS7 should not be used as a GPIO in MPSSE mode.

FT232H bảng dữ liệu(PDF) 52 Page - Future Technology Devices International Ltd.