| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
HTX bảng dữ liệu(PDF) 16 Page - RMT Ltd. |
|
|
|||||||||||||||||||||||||||||
HTX bảng dữ liệu(HTML) 16 Page - RMT Ltd. |
|
16 / 36 page ![]() THERMOELECTRIC HEAT FLUX SENSORS Page 16 of 36 Clean the surface to be measured and spread a thin layer of thermal glue onto the backside of the Sensor. Then press the Sensor onto the surface and follow the curing instructions of the glue. 6.2 Removal of the mounting substance To remove the different mounting substances, refer to the respective manufacturer’s instruction manual. If no instructions are available, contact the supplier. Isopropanol and ethanol can be used as cleaning agents whereas acids and alkali must be avoided to avoid damage to the Sensors. Rub the surface gently with a soaked tissue to remove residues of the mounting substance. 6.3 Mounting methods The Sensor responds to all the three types of heat transfer: conduction, convection and radiation. The HTX Heat Flux Sensors are fully calibrated for measuring conductive heat flux. The conductive calibration ensures highly precise measurements for the following two measurement scenarios. At the interface between a solid surface and gas Fig. 7.1 Mounting onto solid surface. |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |