HTX datasheet(12/36 Pages) RMT

tên linh kiện	HTX

Giải thích chi tiết về linh kiện	Operating Manual

PDF	36 Pages

Scroll/Zoom	100%

nhà sản xuất	RMT [RMT Ltd.]

Trang chủ	http://www.rmtltd.ru

Logo

12 / 36 page

THERMOELECTRIC HEAT FLUX SENSORS

Page 12 of 36

HEAT FLUX SENSORS INTRODUCTION

4.1 Description of installation

The Sensor has two flat sides marked differently and also the cable has

marking (red strip – wire #1).

One side of the Sensor is marked by “+” – positive side.

If the Sensor is placed with its positive side to the heat flux (Fig. 5.1), the

positive voltage output will be on the Sensor’s wire #4.

In other words if the positive voltage is on Connector pin #4, the heat flux

comes from the positive side. And vice versa.

Fig. 5.1 Direction of heat flux.

4.2 Sides of the Sensor

Although the positive side is marked differently, the Sensor can work bi-

directionally with the same performance. Only the direction of the output

voltage will give information about the direction of the heat flux.

But in the application it is simple to follow the rule – heat comes to the

positive side.

HTX bảng dữ liệu(PDF) 12 Page - RMT Ltd.