UM1870 datasheet(44/58 Pages) STMICROELECTRONICS

44 / 58 page

BlueNRG-MS Beacon demonstration application

UM1870

44/58

DocID027602 Rev 1

BlueNRG-MS Beacon demonstration application

The software development kit contains another example, which shows how to configure a

BlueNRG-MS device to advertise specific manufacturing data and allow another BLE device

to know if it is in the range of the BlueNRG-MS beacon device.

7.1

Supported platforms

The BlueNRG-MS Beacon demo is supported by the BlueNRG-MS development platform

(STEVAL-IDB005V1).

7.2

BLE Beacon application setup

This section describes how to configure a BlueNRG-MS device for acting as a beacon

device.

7.2.1

Initialization

The BlueNRG-MS stack must be correctly initialized as follows:

– ACI_GATT_INIT

– ACI_GAP_INIT(Role=0x01): peripheral

7.2.2

Define advertising data

The BLE Beacon application advertises the following manufacturing data:

Note:

SIG company identifiers are available at:

https://www.bluetooth.org/en-us/specification/assigned-numbers/company-identifiers

Table 11. BlueNRG-MS Beacon advertising manufacturing data

Data field

Description

Notes

Company identifier code

SIG company identifier

Default is 0x0030

(STMicroelectronics)

Beacon ID

Fixed value

Location UUID

Beacons UUID

Used to distinguish specific

beacons from others

Major number

Identifier for a group of beacons

Used to group a related set of

beacons

Minor number

Identifier for a single beacon

Used to identify a single beacon

Tx Power

2's complement of the Tx power

Used to establish how far you

are from device

UM1870 bảng dữ liệu(PDF) 44 Page - STMicroelectronics

UM1870 bảng dữ liệu(HTML) 44 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58

bảng dữ liệu tải về

Link URL