UM1870 datasheet(30/58 Pages) STMICROELECTRONICS

30 / 58 page

GUI software description

UM1870

30/58

DocID027602 Rev 1

In the BlueNRG-MS GUI, Scripts window, Script Engine section, click on tab “…”,

browse to the script location and select the script

Click on the “Run Script” tab to run the script. The execution flow (commands and

events) will be displayed in the BlueNRG-MS GUI “Sent/Received Packets” section

In the BlueNRG-MS DK 1.7.0 and future versions, some reference BlueNRG-MS scripts are

available in the GUI/scripts folder.

Note:

It is worthy of note that in order to write and use the BlueNRG-MS scripts, the user is

required to have some knowledge of the Python language (Python 2.7.6), and a good

understanding of the BlueNRG-MS ACI commands and related events. For a detailed

description of the BlueNRG-MS ACI commands and related events, refer to the BlueNRG-

MS Bluetooth LE stack application command interface (ACI) user manual UM1865.

3.2.4

GUI Beacon window

The BlueNRG-MS GUI Beacon window provides some tabs allowing configuration of a

BlueNRG-MS device as a BLE Beacon device which transmits advertising packets with

specific manufacturer data.

Figure 11. BlueNRG-MS GUI Beacon window

The user can configure the following advertising data fields for the BLE Beacon device,

through the BlueNRG-MS GUI Beacon window configuration parameters.

UM1870 bảng dữ liệu(PDF) 30 Page - STMicroelectronics