UM1770 datasheet(22/56 Pages) STMICROELECTRONICS

22 / 56 page

Profile – application interface functions

UM1770

22/56

DocID026385 Rev 2

6.1.3

HRProfile_Send_HRM_Value()

Description

This function or command is called by the application to send the heart rate measurement

value to the collector. The procedure to send a heart rate measurement value returns

BLE_STATUS_SUCCESS if started successfully or BLE_STATUS_FAILED if not. When the

measurement value is sent successfully, the application is notified through the event

EVT_HRS_CHAR_UPDATE_CMPLT.

Parameters

• heartRateVal: The heart rate measurement structure with the following members:

valueformat – indicates the format of the heart measurement value.

'0' if UINT8

'1' if UINT16

sensorContact – this field indicates whether the sensor is in contact with the body

'0' is no or poor contact.

'1' contact o.k.

energyExpendedStatus – indicates whether the EE field is present in the current

characteristic value.

'0' not present.

'1' present.

rrIntervalStatus – indicates whether RR interval values are present in the current

characteristic value

'0' not present.

'1' present.

heartRateValue – the heart rate measurement value.

energyExpended – the energy expended value.

numOfRRIntervalvalues – the maximum length of RR interval values allowed is nine. If

the maximum is exceeded, then only the last nine will be considered, assuming they

correspond to the most recent collected data.

rrIntervalValues[9] – the buffer to hold the nine(9) most recent RR interval values

provided by the application.

6.1.4

HRProfile_Set_Sensor_Contact_Support_Bit()

Description

The application should call this function before sending any data to the device in order to

enable the sensor contact bit (BODY_SENSOR_LOCATION_SUPPORT_MASK) to include

sensor contact information value in the heart rate measurement. It returns

BLE_STATUS_SUCCESS when successfully set and BLE_STATUS_FAILED when not set.

6.1.5

HRProfile_Set_Body_Sensor_Location()

Description

Updates the body sensor location characteristic with the value provided. This should be

called by the application when not in a connection; it returns BLE_STATUS_SUCCESS if

successful.

UM1770 bảng dữ liệu(PDF) 22 Page - STMicroelectronics

UM1770 bảng dữ liệu(HTML) 22 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56

bảng dữ liệu tải về

Link URL