UM1620 datasheet(23/41 Pages) STMICROELECTRONICS

23 / 41 page

DocID024388 Rev 3

23/41

UM1620

API specification

Prototype

UINT32 FlashResume (PSSD_CONFIG pSSDConfig,

UINT8 *resumeState);

Arguments

Return values

Troubleshooting

None.

Comments

This function resumes one operation if there is any operation is suspended. For instance, if

a program operation is in suspended state, it is resumed. If an erase operation is in

suspended state, it is resumed too. If an erase-suspended program operation is in

suspended state, the program operation is resumed prior to resuming the erase operation. It

is better to call this function based on suspendFlag returned from ‘FlashSupend()’.

Following table defines and describes various resume states and associated resume codes.

Assumptions

It assumes that the Flash block is initialized using a ‘FlashInit()’ API.

Table 28. Arguments for FlashResume()

Argument

Description

Range

pSSDConfig

Pointer to the SSD

Configuration Structure.

The values in this structure are chip-dependent.

Please refer to Section 2.3 for more details.

resumeState

Indicate the resume state of

C90FL module after the

function being called.

All return values are listed in Table 29.

Table 29. Return values for FlashResume()

Type

Description

Possible values

UINT32

Successful completion.

C90FL_OK

Table 30. resumeState definitions

Code name

Value

Description

RES_NOTHING

No program/erase operation to be resumed

RES_PGM

A program operation is resumed

RES_ERS

A erase operation is resumed

RES_ERS_PGM

A suspended erase-suspended program operation is

resumed

UM1620 bảng dữ liệu(PDF) 23 Page - STMicroelectronics

UM1620 bảng dữ liệu(HTML) 23 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41

bảng dữ liệu tải về

Link URL