UM1635 datasheet(23/42 Pages) STMICROELECTRONICS

23 / 42 page

DocID024604 Rev 2

23/42

UM1635

API specification

Comments

This function resumes one operation if there is any operation is suspended. For instance, if

a program operation is in suspended state, it is resumed. If an erase operation is in

suspended state, it is resumed too. If an erase-suspended program operation is in

suspended state, the program operation is resumed prior to resuming the erase operation. It

is better to call this function based on suspendFlag returned from ‘FlashSupend()’.

Table 30 defines and describes various resume states and associated resume codes.

Assumptions

It assumes that the Flash block is initialized using the ‘FlashInit()’ API.

2.6.9

GetLock()

Description

This function checks the block locking status of Shadow/Low/Middle/High address spaces in

the C90FL2 module.

Prototype

UINT32 GetLock (PSSD_CONFIG pSSDConfig,

UINT8 blkLockIndicator,

BOOL *blkLockEnabled,

UINT32 *blkLockState);

Arguments

Table 30. resumeState definitions

Code Name

Value

Description

RES_NOTHING

No program/erase operation to be resumed

RES_PGM

A program operation is resumed

RES_ERS

A erase operation is resumed

RES_ERS_PGM

A suspended erase-suspended program operation is

resumed

Table 31. Arguments for GetLock()

Argument

Description

Range

pSSDConfig

Pointer to the SSD Configuration Structure.

The values in this structure are chip-

dependent. Please refer to Section 2.3 for

more details.

blkLockIndicator

Indicating the address space and the block

locking level, which determines the address

space block locking register to be checked.

Refer to Table 34 for valid values for this

parameter.

UM1635 bảng dữ liệu(PDF) 23 Page - STMicroelectronics

UM1635 bảng dữ liệu(HTML) 23 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42

bảng dữ liệu tải về

Link URL