| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
COM20020ILJP bảng dữ liệu(PDF) 10 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
COM20020ILJP bảng dữ liệu(HTML) 10 Page - Microchip Technology |
|
10 / 72 page ![]() 5Mbps ARCNET (ANSI 878.1) Controller with 2K x 8 On-Chip RAM Datasheet Revision 12-05-06 Page 10 SMSC COM20020I Rev D DATASHEET PLCC PIN NO. NAME SYMBOL DESCRIPTION 21 nTransmit nEnable nTXEN Output. This signal is used prior to the Power-up to enable the line drivers for transmission. The polarity of the signal is programmable through the nPULSE2 pin. nPULSE2 floating before Power-up: nTXEN active low (Default option) nPULSE2 grounded before Power-up: nTXEN active high (This option is only available in Backplane Mode) 16,17 Crystal Oscillator XTAL1, XTAL2 An external crystal should be connected to these pins. Oscillation frequency range is from 10 to 20 MHz. If an external TTL clock is used instead, it must be connected to XTAL1 with a 390 Ω pull-up resistor, and XTAL2 should be left floating. 15,28 Power Supply VDD +5 Volt Power Supply pin. 7,14,22 Ground VSS Ground pin. |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |