| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
WM8903 bảng dữ liệu(PDF) 77 Page - Wolfson Microelectronics plc |
|
|
|||||||||||||||||||||||||||||
WM8903 bảng dữ liệu(HTML) 77 Page - Wolfson Microelectronics plc |
|
77 / 178 page ![]() Production Data WM8903 w PD, Rev 4.5, June 2012 77 REFERENCE VOLTAGES AND MASTER BIAS This section describes the analogue reference voltage and bias current controls. It also describes the VMID soft-start circuit for pop-free start-up and shut-down. Note that, under the recommended usage conditions of the WM8903, these features will be configured by running the default Start-Up and Shut- Down sequences as described in the “Control Write Sequencer” section. In these cases, the user does not need to set these register fields directly. The analogue circuits in the WM8903 require a mid-rail analogue reference voltage, VMID. This reference is generated from AVDD via a programmable resistor chain. Together with the external VMID decoupling capacitor, the programmable resistor chain results in a slow, normal or fast charging characteristic on VMID. This is controlled by VMID_RES [1:0], and can be used to optimise the reference for normal operation, low power standby or for fast start-up as described in Table 49. For normal operation, the VMID_RES field should be set to 01. The analogue circuits in the WM8903 require a bias current. The normal bias current is enabled by setting BIAS_ENA. Note that the normal bias current source requires VMID to be enabled also. The normal bias current can also be controlled using the ISEL field as described in Table 49. This can be used to reduce power consumption, but may have a detrimental impact on audio performance in some usage modes. The default setting is recommended. Note that the DAC and Output PGA bias circuits may also be adjusted in order to reduce power consumption. For details, see “Digital-to-Analogue Converter (DAC)“ or “Output Signal Path”. An alternate bias current source (Start-Up Bias) is provided for pop-free start-up; this is selected using POBCTRL (see Table 50). Note that the default setting of POBCTRL selects the Start-Up Bias. The normal bias is only selected when POBCTRL is set to logic 0. REGISTER ADDRESS BIT LABEL DEFAULT DESCRIPTION R4 (04h) Bias Control 0 3:2 ISEL [1:0] 10 Master Bias control 00 = Normal bias x 0.5 01 = Normal bias x 0.75 10 = Normal bias 11 = Normal bias x 1.5 0 BIAS_ENA 0 Enables the Normal bias current generator (for all analogue functions) 0 = Disabled 1 = Enabled R5 (05h) VMID Control 0 2:1 VMID_RES [1:0] 00 VMID Divider Enable and Select 00 = VMID disabled (for OFF mode) 01 = 2 x 50k divider (for normal operation) 10 = 2 x 250k divider (for low power standby) 11 = 2 x 5k divider (for fast start-up) Table 49 Reference Voltages and Master Bias Enable |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |