ST10F276E datasheet(190/235 Pages) STMICROELECTRONICS

tên linh kiện	ST10F276E

Giải thích chi tiết về linh kiện	16-bit MCU with MAC unit 832 Kbyte Flash memory and 68 Kbyte RAM

PDF	235 Pages

Scroll/Zoom	100%

nhà sản xuất	STMICROELECTRONICS [STMicroelectronics]

Trang chủ	http://www.st.com

Logo

190 / 235 page

Electrical characteristics

ST10F276E

190/235

Doc ID 12303 Rev 3

Nonlinearity error

Nonlinearity error is the deviation between actual and the best-fitting A/D conversion charac-

teristics (see Figure 46):

–

Differential nonlinearity error is the actual step dimension versus the ideal one (1

LSBIDEAL).

–

Integral nonlinearity error is the distance between the center of the actual step and

the center of the bisector line, in the actual characteristics. Note that for integral

nonlinearity error, the effect of offset, gain and quantization errors is not included.

Note:

Bisector characteristic is obtained drawing a line from 1/2 LSB before the first step of the

real characteristic, and 1/2 LSB after the last step again of the real characteristic.

23.7.3

Total unadjusted error

The total unadjusted error (TUE) specifies the maximum deviation from the ideal character-

istic: The number provided in the datasheet represents the maximum error with respect to

the entire characteristic. It is a combination of the offset, gain and integral linearity errors.

The different errors may compensate each other depending on the relative sign of the offset

and gain errors. Refer to Figure 46, see TUE.

Figure 46.

A/D conversion characteristic

ST10F276E bảng dữ liệu(PDF) 190 Page - STMicroelectronics