| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
MMA8652FC bảng dữ liệu(PDF) 19 Page - Freescale Semiconductor, Inc |
|
|
|||||||||||||||||||||||||||||
MMA8652FC bảng dữ liệu(HTML) 19 Page - Freescale Semiconductor, Inc |
|
19 / 77 page ![]() MMA8652FC Sensors Freescale Semiconductor, Inc. 19 For the following subsections, use the following legend. 5.11.2 Multiple byte read (See Table 11 for next auto-increment address.) 1. When performing a multi-byte read or “burst read”, the MMA8652FC automatically increments the received register address commands after a read command is received. 2. After following the steps of a single byte read, multiple bytes of data can be read from sequential registers after each MMA8652FC acknowledgment (AK) is received, 3. Until a no acknowledge (NAK) occurs from the Master, 4. Followed by a stop condition (SP), which signals the end of transmission. Figure 12. Multiple Byte Read timing (I2C) 5.11.3 Single byte write 1. To start a write command, the Master transmits a start condition (ST) to the MMA8652FC, slave address ($1D) with the R/W bit set to “0” for a write, 2. The MMA8652FC sends an acknowledgement. 3. Next the Master (MCU) transmits the address of the register to write to, and the MMA8652FC sends an acknowledgement. 4. Then the Master (or MCU) transmits the 8-bit data to write to the designated register, and the MMA8652FC sends an acknowledgement that it has received the data. Because this transmission is complete, the Master transmits a stop condition (SP) to the data transfer. The data sent to the MMA8652FC is now stored in the appropriate register. Figure 13. Single Byte Write timing (I2C) 5.11.4 Multiple byte write (See Table 11 for next auto-increment address.) 1. After a write command is received, the MMA8652FC automatically increments the received register address commands. 2. Therefore, after following the steps of a single byte write, multiple bytes of data can be written to sequential registers after each MMA8652FC acknowledgment (ACK) is received. Legend ST: Start Condition SP: Stop Condition NAK: No Acknowledge W: Write = 0 SR: Repeated Start Condition AK: Acknowledge R: Read = 1 Master ST Device Address[7:1] W Register Address[7:0] SR Device Address[7:1] R AK Slave AK AK AK Data[7:0] Master AK AK NAK SP Slave Data[7:0] Data[7:0] Data[7:0] Master ST Device Address[7:1] W Register Address[7:0] Data[7:0] SP Slave AK AK AK |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |