CS5467 datasheet(29/46 Pages) CIRRUS

29 / 46 page

CS5467

DS714F3

8. REGISTER DESCRIPTIONS

1. “Default” = bit states after power-on or reset

2. DO NOT write a “1” to any unpublished register bit.

3. DO NOT write to any unpublished register address.

8.1 Page Register

8.1.1 Page – Address: 31, Write-only, can be written from ANY page.

Default = 0

is 12 bits wide. Therefore, registers are organized into “Pages”. There are 128 pages of 32 registers each.

The Page register provides the 7 high-order address bits and selects one of the 128 register pages. Not all

pages are used,

Page

is a write-only integer containing 7 bits.

8.2 Page 0 Registers

8.2.1 Configuration (Config) – Address: 0

Default = 1 (K=1)

PC[7:0]

Phase compensation for channel 1. Sets a delay in voltage, relative to current. Phase is

signed and in the range of -1.0

 value  1.0 sample (OWR) intervals.

EWA

Allows the E1 and E2 pins to be configured as open-drain outputs.

0 = Normal Outputs

1 = Open-drain Outputs

IMODE, IINV

Interrupt configuration. Selects INT pin behavior.

00 = Low Logic Level When Asserted

01 = High Logic Level When Asserted

10 = Low-going Pulse on New Interrupt

11 = High-going Pulse on New Interrupt

iCPU

Inverts the CPUCLK output.

0=Default

1 = Invert CPUCLK.

K[3:0]

Clock divider. Divides MCLK by K to generate internal clock DCLK. (DCLK = MCLK/K). K

is unsigned and in the range of 1 to 16. When zero, K = 16. At reset, K = 1.

MSB

LSB

PC7

PC6

PC5

PC4

PC3

PC2

PC1

PC0

EWA

IMODE

IINV

654

iCPU

K3K2

K1K0

CS5467 bảng dữ liệu(PDF) 29 Page - Cirrus Logic

CS5467 bảng dữ liệu(HTML) 29 Page - Cirrus Logic

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46

bảng dữ liệu tải về

Link URL