| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
CS5467 bảng dữ liệu(PDF) 17 Page - Cirrus Logic |
|
|
|||||||||||||||||||||||||||||
CS5467 bảng dữ liệu(HTML) 17 Page - Cirrus Logic |
|
17 / 46 page ![]() CS5467 DS714F3 17 4.9 Peak Voltage and Current Peak current (I1PEAK, I2PEAK) and peak voltage (V1PEAK, V2PEAK) are the largest current and voltage samples detected in the previous low-rate interval. 4.10 Power Offset The power offset registers, P1OFF (P2OFF) can be used to offset erroneous power sources resident in the sys- tem not originating from the power line. Residual power offsets are usually caused by crosstalk into current paths from voltage paths or from ripple on the meter or chip’s power supply, or from inductance from a nearby transformer. These offsets can be either positive or negative, indicat- ing crosstalk coupling either in phase or out of phase with the applied voltage input. The power offset regis- ters can compensate for either condition. To use this feature, measure the average power at no load using either Single or Continuous Conversion com- mands. Take the measured result (from the P1AVG (P2AVG) register), invert (negate) the value and write it to the associated power offset register, P1OFF (P2OFF). |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |