| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
MAC7200 bảng dữ liệu(PDF) 218 Page - Freescale Semiconductor, Inc |
|
|
|||||||||||||||||||||||||||||
MAC7200 bảng dữ liệu(HTML) 218 Page - Freescale Semiconductor, Inc |
|
218 / 976 page ![]() Nexus Bus Aborts MAC7200 Microcontroller Family Reference Manual, Rev. 2 140 Freescale Semiconductor 11.5.5 RDY - DMA Ready (Active low output) This pin indicates to the development tool that a DMA access has completed successfully. 11.5.6 MCKO - Message Clock (Output) This pin provides the clock reference for all Nexus inputs and outputs. 11.6 Nexus Bus Aborts The Nexus is not capable of producing any bus aborts. Any Nexus bus accesses that generate aborts are treated as if the accesses were initiated by the ARM7 core. 11.7 Nexus Differences from MAC71xx • Changed from Nexus2p to Nexus3p (Includes data trace) • Added four “address match only” breakpoints (pending approval) • Added two data watchpoints • Changed from two MDO pins to eight MDO pins • Number of MSEO pins is no longer hard-coded in the design, but now selectable with the MSC bit in the Nexus PCR register 11.8 Nexus Application Usage 11.8.1 Nexus Configuration Enabling and selection of the Nexus port is via the value of the Port F0/F1 pins at Reset (See Table 11-12). On some packages, only one Nexus Port may be available. Once a Nexus Port is enabled and selected, the Nexus itself must still be enabled. Please refer to the Nexus 3 Block Guide or the Nexus web site www.ieee-isto.org/Nexus5001 for more information. On the MAC71xx family, the number of MSEO pins selected was done via an input port on the Nexus module (ext_mseo_sel) (0 = 1-pin, 1 = 2-pin). For all MAC71xx devices, this was tied to 0, denoting a single MSEO pin was available. On the MAC72xx, this selection is done via the MSC bit in the Port Table 11-12. Nexus Configuration PF0 PF1 Description 0 0 Nexus Ports are disabled (Ports are used for "normal" functionality) 0 1 Nexus Primary Port is enabled 1 0 Nexus Ports are disabled (Ports are used for "normal" functionality) 1 1 Nexus Secondary Port is enabled |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |