| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
ATmega16U4 bảng dữ liệu(PDF) 45 Page - ATMEL Corporation |
|
|
|||||||||||||||||||||||||||||
ATmega16U4 bảng dữ liệu(HTML) 45 Page - ATMEL Corporation |
|
45 / 408 page ![]() 45 7766D–AVR–01/09 ATmega16U4/ATmega32U4 • Bit 7 - PRTWI: Power Reduction TWI Writing a logic one to this bit shuts down the TWI by stopping the clock to the module. When waking up the TWI again, the TWI should be re initialized to ensure proper operation. • Bit 6 - Res: Reserved bit This bits is reserved and will always read as zero. • Bit 5 - PRTIM0: Power Reduction Timer/Counter0 Writing a logic one to this bit shuts down the Timer/Counter0 module. When the Timer/Counter0 is enabled, operation will continue like before the shutdown. • Bit 4 - Res: Reserved bit This bit is reserved and will always read as zero. • Bit 3 - PRTIM1: Power Reduction Timer/Counter1 Writing a logic one to this bit shuts down the Timer/Counter1 module. When the Timer/Counter1 is enabled, operation will continue like before the shutdown. • Bit 2 - PRSPI: Power Reduction Serial Peripheral Interface Writing a logic one to this bit shuts down the Serial Peripheral Interface by stopping the clock to the module. When waking up the SPI again, the SPI should be re initialized to ensure proper operation. • Bit 1 - Res: Reserved bit These bits are reserved and will always read as zero. • Bit 0 - PRADC: Power Reduction ADC Writing a logic one to this bit shuts down the ADC. The ADC must be disabled before shut down. The analog comparator cannot use the ADC input MUX when the ADC is shut down. 7.7.2 Power Reduction Register 1 - PRR1 • Bit 7 - PRUSB: Power Reduction USB Writing a logic one to this bit shuts down the USB by stopping the clock to the module. When waking up the USB again, the USB should be re initialized to ensure proper operation. • Bit 6..5 - Res: Reserved bits These bits are reserved and will always read as zero. • Bit 4- PRTIM4: Power Reduction Timer/Counter4 Writing a logic one to this bit shuts down the Timer/Counter4 module. When the Timer/Counter4 is enabled, operation will continue like before the shutdown. • Bit 3 - PRTIM3: Power Reduction Timer/Counter3 Initial Value 0000 00 0 0 Bit 7 654 3 2 1 0 PRUSB – – PRTIM4 PRTIM3 – – PRUSART1 PRR1 Read/Write R/W R R R R/W R R R/W Initial Value 0 0 0 0 0 0 0 0 |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |