56F8167 datasheet(80/182 Pages) FREESCALE

tên linh kiện	56F8167

Giải thích chi tiết về linh kiện	16-bit Digital Signal Controllers

PDF	182 Pages

Scroll/Zoom	100%

nhà sản xuất	FREESCALE [Freescale Semiconductor, Inc]

Trang chủ	http://www.freescale.com

Logo

80 / 182 page

56F8367 Technical Data, Rev. 9

Freescale Semiconductor

Preliminary

4.8 Factory Programmed Memory

The Boot Flash memory block is programmed during manufacturing with a default Serial Bootloader

program. The Serial Bootloader application can be used to load a user application into the Program and

Data Flash (NOT available in the 56F8167 device) memories of the device. The 56F83xx SCI/CAN

Bootloader User Manual (MC56F83xxBLUM) provides detailed information on this firmware. An

application note, Production Flash Programming (AN1973), details how the Serial Bootloader program

can be used to perform production Flash programming of the on-board Flash memories as well as other

potential methods.

Like all the Flash memory blocks, the Boot Flash can be erased and programmed by the user. The Serial

Bootloader application is programmed as an aid to the end user, but is not required to be used or maintained

in the Boot Flash memory.

FC2MB15_DATA

$BE

Message Buffer 15 Data Register

Reserved

Table 4-39 FlexCAN2 Registers Address Map (Continued)

(FC2_BASE = $00 FA00)

FlexCAN2 is NOT available in the 56F8167 device

Address Offset

56F8167 bảng dữ liệu(PDF) 80 Page - Freescale Semiconductor, Inc