7733 datasheet(178/940 Pages) RENESAS

tên linh kiện	7733

Giải thích chi tiết về linh kiện	16-BIT SINGLE-CHIP MICROCOMPUTER

PDF	940 Pages

Scroll/Zoom	100%

nhà sản xuất	RENESAS [Renesas Technology Corp]

Trang chủ	http://www.renesas.com

Logo

178 / 940 page

TIMER B

7733 Group User’s Manual

7–15

7.3.3 Operation in timer mode

When the count start flag is set to “1,” the counter starts counting of the count source.

When an underflow occurs, the reload register’s contents is reloaded, and then counting is continued.

The timer Bi interrupt request bit is set to “1” when the underflow occurs in .

After this, the interrupt request bit remains set to “1” until the interrupt request is accepted or the

interrupt request bit is cleared to “0” by software.

Figure 7.3.3 shows an operation example in the timer mode.

7.3 Timer mode

Fig. 7.3.3 Operation example in timer mode

Counting is stopped.

Counting is restarted.

FFFF16

000016

Time

Count start flag

Timer Bi interrupt

request bit

“1”

n = Reload register’s contents

Cleared to “0” when an interrupt request is

accepted; otherwise, cleared by software

Set to “1” by software

Counting is started.

Set to “1” by software

“0”

1 / fi ! (n + 1)

fi = Frequency of count source

( 2, f16, f64, f512)

Cleared to “0” by software

7733 bảng dữ liệu(PDF) 178 Page - Renesas Technology Corp