| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
7733 bảng dữ liệu(PDF) 341 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
7733 bảng dữ liệu(HTML) 341 Page - Renesas Technology Corp |
|
341 / 940 page ![]() CONNECTING EXTERNAL DEVICES 7733 Group User’s Manual 12–16 P42/ φ1 Timers A and B, Serial I/O, A-D converter, Watchdog timer Item State 12.3 Ready function The ready function facilitates access to external devices which require a long access time. ____ By applying “L” level to pin RDY in the memory expansion or microprocessor mode, the microcomputer ____ enters the ready state. While pin RDY’s level is “L,” this state is retained. Table 12.3.1 lists the microcomputer’s state in the ready state. In the ready state, oscillation of the oscillator does not stop. Therefore, the internal peripheral devices can operate even in the ready state. The ready function is valid for the internal and external areas. Table 12.3.1 Microcomputer’s state in ready state Clock φ1 output selection bit*1: Bit 7 at address 5E16 Signal output disable selection bit*2: Bit 6 at address 6C16 ____ Note: When “L” level which was input to pin RDY is sampled at one of the following timings, this signal is not accepted. (Note that φCPU is stopped at “L” level.) __ q When the level of signal E is “H” while the bus is in use (Refer to in Figure 12.3.1.) q Immediately before a wait generated by the software wait (Refer to in Figure 12.3.1.) Oscillation φCPU Operating Stopped at “L” level ____ Retains the same state in which RDY was accepted. _____ __ __ ____ HLDA , E, R/W, BHE, ALE, A0 to A7, A8/D8 to A15/D15, A16/ D0 to A23/D7, P43 to P47, P5 to P8 In the memory expansion mode s When the clock φ1 output selection bit*1 = “1” Outputs clock φ1. s When the clock φ1 output selection bit = “0” ____ Retains the same state in which RDY was accepted. In the microprocessor mode s When the signal output disable selection bit*2 = “1” ____ Retains the same state in which RDY was accepted. s When the signal output disable selection bit = “0” Outputs clock φ1. Operating 12.3 Ready function |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |