| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
M16C/26 bảng dữ liệu(PDF) 223 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
M16C/26 bảng dữ liệu(HTML) 223 Page - Renesas Technology Corp |
|
223 / 239 page ![]() Appendix Standard Serial I/O Mode 1 (Flash Memory Version) 217 Renesas Technology Corp. M16C/26 Group SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER Under development Preliminary Specifications Rev. 0.9 Specifications in this manual are tentative and subject to change. SRD1 bits SR15 (bit7) SR14 (bit6) SR13 (bit5) SR12 (bit4) SR11 (bit3) SR10 (bit2) SR9 (bit1) SR8 (bit0) Status Register 1 (SRD1) Status register 1 indicates the status of serial communications, results from ID checks and results from check sum comparisons. It can be read after the SRD by writing the read status register command (7016). Also, status register 1 is cleared by writing the clear status register command (5016). Table 1.22.4 gives the definition of each status register 1 bit. “0016” is output when power is turned ON and the flag status is maintained even after the reset. Table 1.22.4. Status register 1 (SRD1) Boot Update Completed Bit (SR15) This flag indicates whether the control program was downloaded to the RAM or not, using the down- load function. Flash Identification Value (SR14) This flag indicates whether the flash memor type is HND or DINOR. Check Sum Match Bit (SR12) This flag indicates whether the check sum matches or not when a program, is downloaded for execu- tion using the download function. ID Check Completed Bits (SR11 and SR10) These flags indicate the result of ID checks. Some commands cannot be accepted without an ID check. Data Receive Time Out (SR9) This flag indicates when a time out error is generated during data reception. If this flag is attached during data reception, the received data is discarded and the microcomputer returns to the command wait state. Status name Boot update completed bit Flash identification value Reserved Check sum match bit ID check completed bits Data receive time out Reserved Definition "1" "0" Update co mpleted HND - Match 00 01 10 11 Not verified Verification mismatch Reserved Verified Time out - Not update DINOR - Mismatch Normal operation - d |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |