| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
H8S/20223 bảng dữ liệu(PDF) 462 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
H8S/20223 bảng dữ liệu(HTML) 462 Page - Renesas Technology Corp |
|
462 / 992 page ![]() Section 14 Timer RB Rev. 1.00 Oct. 03, 2008 Page 436 of 962 REJ09B0465-0100 14.5 Usage Notes 1. In programmable one-shot generation mode and programmable wait one-shot generation mode, if the counting is stopped by clearing the TSTART bit in TRBCR to 0, the timer counter holds a count value, and then stops. 2. After 1 is written to the TSTART bit when the counting is stopped, the TCSTF bit remains 0 for the number of cycles of the count source. The timer RB related registers*, with the exception of the TRBCR for reading should not be accessed until the TCSTF bit is set to 1. After 0 is written to the TSTART bit during counting, the TCSTF bit remains 1 for the number of cycles of the count source. The timer RB related registers*, with the exception of the TRBCR for reading should not be accessed until the TCSTF bit is cleared to 0. Note: Timer RB-related registers refer to registers TRBCR, TRBOCR, TRBIOC, TRBMR, TRBPRE, TRBSC, and TRBPR. 3. TRBPRE and TRBPR should not be set to H'00 at the same time. 4. When rewriting the bits TRBPRE, TRBPR, and TRBSC at TSTART = 0, set TSTART to 1 after the passage of at least φ2-cycle of the system clock. 5. When TSTART = 1 or TCSTF = 1, TRBIOC, or TRBMR should not be rewritten. 6. When writing 1 to the TOSST bit, read the TCSTF bit and write by verifying the value 1. 7. In programmable waveform generation mode or programmable wait one-shot mode, make sure another write to TRBSC does not occur between writing to TRBPR and reloading to the counter. 8. When writing successively to TRBPRE during counting (TCSTF=1), allow a minimum write interval of 4 cycles of count source. 9. When writing successively to TRBPR and TRBSC during counting (TCSTF=1), allow a minimum write interval of 4 cycles of count source. 10. When 1 is written to the TOSST or TOSSP bit in TRBOCR, the value of the TOSSTF bit changes accordingly after 1 to 2 cycles of the source for counting. If 1 is written to the TOSSP bit during the period between the TOSST bit having been set to 1 and the value of the TOSSTF bit becoming 1, the value of the TOSSTF bit will become 0 in some cases and 1 in others, depending on the internal state. In the same way, if 1 is written to the TOSST bit during the period between the TOSSP bit having been set to 1 and the value of the TOSSTF bit becoming 0, whether the value of the TOSSTF bit will become 0 or 1 is not defined. |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |