công cụ tìm kiếm bảng dữ liệu linh kiện điện tử
  Vietnamese  ▼
ALLDATASHEET.VN

X  

H8S/20223 bảng dữ liệu(PDF) 365 Page - Renesas Technology Corp

tên linh kiện H8S/20223
Giải thích chi tiết về linh kiện  16-Bit Single-Chip Microcomputer H8S Family / H8S/Tiny Series
PDF  992 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
nhà sản xuất  RENESAS [Renesas Technology Corp]
Trang chủ  http://www.renesas.com
Logo RENESAS - Renesas Technology Corp

H8S/20223 bảng dữ liệu(HTML) 365 Page - Renesas Technology Corp

Back Button H8S/20223 Datasheet HTML 361Page - Renesas Technology Corp H8S/20223 Datasheet HTML 362Page - Renesas Technology Corp H8S/20223 Datasheet HTML 363Page - Renesas Technology Corp H8S/20223 Datasheet HTML 364Page - Renesas Technology Corp H8S/20223 Datasheet HTML 365Page - Renesas Technology Corp H8S/20223 Datasheet HTML 366Page - Renesas Technology Corp H8S/20223 Datasheet HTML 367Page - Renesas Technology Corp H8S/20223 Datasheet HTML 368Page - Renesas Technology Corp H8S/20223 Datasheet HTML 369Page - Renesas Technology Corp Next Button
Zoom Inzoom in Zoom Outzoom out
 365 / 992 page
background image
Section 11 Data Transfer Controller (DTC)
Rev. 1.00 Oct. 03, 2008 Page 339 of 962
REJ09B0465-0100
11.2.7
DTC Enable Registers A to H (DTCERA to DTCERH)
b7
DTCEn7
b6
DTCEn6
b5
DTCEn5
b4
DTCEn4
b3
DTCEn3
b2
DTCEn2
b1
DTCEn1
b0
DTCEn0
H'FF0534 to H'FF053B
Bit:
Address:
Value after reset:
Bit
Symbol
Bit Name
Description
R/W
7
DTCEn7
R/W
6
DTCEn6
R/W
5
DTCEn5
R/W
4
DTCEn4
R/W
3
DTCEn3
R/W
2
DTCEn2
R/W
1
DTCEn1
R/W
0
DTCEn0
DTC activation
enable
0: A relevant interrupt source is not selected as a
DTC activation source.
1: A relevant interrupt source is selected as a DTC
activation source.
[Setting condition]
• Setting this bit to 1 specifies a relevant interrupt
source to a DTC activation source.
[Clearing conditions]
• When the DISEL bit in MRB is set to 1 and the
data transfer has ended.
• When the specified number of data transfers has
ended.
These bits are not automatically cleared when the
DISEL bit is 0 and the specified number of data
transfers has not ended.
• When 0 is written to DTCE after reading DTCE =
1.
R/W
Notes: n = A to H
DTCE bits with no corresponding interrupt are reserved. The write value should always be
0.
DTCER, which is comprised of DTCERA to DTCERH, is a register that specifies DTC activation
interrupt sources. The correspondence between interrupt sources and DTCE bits is shown in table
11.1. For DTCE bit setting, use bit manipulation instructions such as BSET and BCLR. If all
interrupts are masked, multiple activation sources can be set at one time (only at the initial setting)
by writing data after executing a dummy read on the relevant register.



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100  ...More


bảng dữ liệu tải về

Go To PDF Page


Link URL



Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không?  [ DONATE ] 

Alldatasheet là   |   Quảng cáo   |   Liên lạc với chúng tôi   |   Chính sách bảo mật   |   Liên kết đến bảng dữ liệu    |   Trao đổi link   |   Tìm kiếm theo nhà sản xuất
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com