STA333W datasheet(22/50 Pages) STMICROELECTRONICS

22 / 50 page

STA333W

22/50

DocID13365 Rev 3

6.1

Configuration registers (addr 0x00 to 0x05)

6.1.1

Configuration register A (addr 0x00)

Master clock select

The STA333W supports sample rates of 32 kHz, 44.1 kHz, 48 KHz, 88.2 kHz, 96 kHz,

176.4 kHz, and 192 kHz. Therefore the internal clock is:



32.768 MHz for 32 kHz



45.1584 MHz for 44.1 kHz, 88.2 kHz, and 176.4 kHz



49.152 MHz for 48 kHz, 96 kHz, and 192 kHz

The external clock frequency provided to the XTI pin must be a multiple of the input sample

frequency (fS).

The relationship between the input clock and the input sample rate is determined by both

the MCSx and the IR (input rate) register bits. The MCSx bits determine the PLL factor

generating the internal clock and the IR bit determines the oversampling ratio used

internally.

FDRB

TWAB

TWRB

IR1

IR0

MCS2

MCS1

MCS0

Table 9. Master clock select

Bit

R/W

RST

Name

Description

0R/W

1MCS0

Master clock select: Selects the ratio between the

input I²S sample frequency and the input clock.

1R/W

1MCS1

2R/W

0MCS2

Table 10. MCS bits

Input sample rate

fS (kHz)

MCS[2:0]

101

100

011

010

001

000

32, 44.1, 48

576 * fS

128 * fS

256 * fS

384 * fS 512 * fS 768 * fS

88.2, 96

64 * fS

128 * fS

192 * fS 256 * fS 384 * fS

176.4, 192

32 * fS

64 * fS

96 * fS

128 * fS 192 * fS

STA333W bảng dữ liệu(PDF) 22 Page - STMicroelectronics

STA333W bảng dữ liệu(HTML) 22 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50

bảng dữ liệu tải về

Link URL