MB89R118C datasheet(28/47 Pages) RAMXEED

28 / 47 page

MB89R118C

DS411-00001-6v0-E

2-7. Reset to Ready command

On receiving the Reset to Ready command, the transponder enters the ready state.



Request

[Request from the reader/writer to the transponder]



Response

[Response from the transponder to the reader/writer]

(1) When Error_flag set

(2) When Error_flag not set

2-8. Write AFI command

On receiving the Write AFI command, the transponder writes the data of AFI to FeRAM.

The transponder performs verification after writing and returns an error code if the writing has failed.

If the Option_flag (bit 7) is “0”, the transponder shall return its response when it has completed the write

operation starting after “t1nom (320.9 s) + a multiple of 4096/fc (302.1 s)” with total tolerance of  32/fc

(2.4 s) and latest within 20 ms. If it is “1”, transponder shall wait for the reception of an EOF from the reader/

writer and upon such reception still return its response (However, if an EOF is not sent within 38 ms, the

time-out occurs and the transponder can receive another command) .



Request

[Request from the reader/writer to the transponder]



Response

[Response from the transponder to the reader/writer]

(1) When Error_flag set

(2) When Error_flag not set

SOF

Flag

Command (Reset to Ready)

UID (Addressed mode)

CRC

EOF

8 bits

8 bits (“26H”)

64 bits

16 bits

SOF

Flag

Error code

CRC

EOF

8 bits (“01H”)

8 bits

16 bits

SOF

Flag

CRC

EOF

8 bits (“00H”)

16 bits

SOF

Flag

Command (Write AFI) UID (Addressed mode)

AFI

CRC

EOF

8 bits

8 bits (“27H”)

64 bits

8 bits

16 bits

SOF

Flag

Error code

CRC

EOF

8 bits (“01H”)

8 bits

16 bits

SOF

Flag

CRC

EOF

8 bits (“00H”)

16 bits

MB89R118C bảng dữ liệu(PDF) 28 Page - RAMXEED LIMITED

MB89R118C bảng dữ liệu(HTML) 28 Page - RAMXEED LIMITED

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47

bảng dữ liệu tải về

Link URL