công cụ tìm kiếm bảng dữ liệu linh kiện điện tử
  Vietnamese  ▼
ALLDATASHEET.VN

X  

1060 bảng dữ liệu(PDF) 9 Page - Microchip Technology

tên linh kiện 1060
Giải thích chi tiết về linh kiện  Six-channel QTouch® Touch Sensor IC
PDF  35 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
nhà sản xuất  MICROCHIP [Microchip Technology]
Trang chủ  http://www.microchip.com
Logo MICROCHIP - Microchip Technology

1060 bảng dữ liệu(HTML) 9 Page - Microchip Technology

Back Button 1060 Datasheet HTML 5Page - Microchip Technology 1060 Datasheet HTML 6Page - Microchip Technology 1060 Datasheet HTML 7Page - Microchip Technology 1060 Datasheet HTML 8Page - Microchip Technology 1060 Datasheet HTML 9Page - Microchip Technology 1060 Datasheet HTML 10Page - Microchip Technology 1060 Datasheet HTML 11Page - Microchip Technology 1060 Datasheet HTML 12Page - Microchip Technology 1060 Datasheet HTML 13Page - Microchip Technology Next Button
Zoom Inzoom in Zoom Outzoom out
 9 / 35 page
background image
9
AT42QT1060 [DATASHEET]
9505H–AT42–04/2015
2.11
Guard Channel
The device has a guard channel option, which allows any key, or combination of keys, to be configured as a guard
channel to help prevent false detection. Guard channel keys should be more sensitive than the other keys (physically
bigger or larger Cs), subject to burst length limitations (see Section 2.12.3).
With guard channel enabled, the designated key(s) is connected to a sensor pad which detects the presence of
touch and overrides any output from the other keys using the chip AKS feature. The guard channel option is enabled
by an I2C command.
To enable a guard channel the relevant key should be removed from the key mask (see Table 5-1 on page 16). In
addition, the guard channel needs to be included within the AKS mask with the other keys for the guard function to
operate. Note that a detection on the guard channel does not cause a change request.
With the guard channel not enabled, all the keys work normally.
Figure 2-1.
Guard Channel Example
2.12
Signal Processing
2.12.1 Detect Threshold
The device detects a touch when the signal has crossed a threshold level and remained there for a specified number
of counts (see Section 5.11 on page 19). This can be altered on a key-by-key basis using the key threshold I2C
commands.
2.12.2 Detect Integrator
The device features a fast detection integrator counter (DI filter), which acts to filter out noise at the small expense of
slower response time. The DI filter requires a programmable number of consecutive samples confirmed in detection
before the key is declared to be touched. There is also a fast DI on the end of the detection (see Section 5.20 on
page 23). The fast DI will not be applied at the start of a detection if a detection on any other channel has already
been declared.
2.12.3 Burst Length Limitations
In a balanced system common signals are regarded as thermal shifts and are removed by the relative referencing
drifting, if enabled. This means that the burst lengths must be similar. This can be checked by reading the reference
values (Address 52 – 63) and making sure that they are similar. The absolute maximum difference is that the
maximum value of reference is less than three times the minimum value amongst all the channels. It is
recommended having the burst lengths (references) as close together as possible, through better routing and layout.
For example, if the keys have references of 250, 230, 220, 240, 200 and 210, this is acceptable. If the keys have
references of 250, 230, 220, 240, 200 and 710, the efficiency of the relative referencing drifting will be affected. The
last key’s (710) layout should be changed or relative referencing be disabled. The closer the references are in value,
the better the relative referencing drifting performs.
Guard channel



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35


bảng dữ liệu tải về

Go To PDF Page


Link URL



Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không?  [ DONATE ] 

Alldatasheet là   |   Quảng cáo   |   Liên lạc với chúng tôi   |   Chính sách bảo mật   |   Liên kết đến bảng dữ liệu    |   Trao đổi link   |   Tìm kiếm theo nhà sản xuất
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com