TVP7002PZP datasheet(18/52 Pages) TI

tên linh kiện	TVP7002PZP

Giải thích chi tiết về linh kiện	TRIPLE 8-/10-BIT 165-/110-MSPS, VIDEO AND GRAPHICS DIGITIZER WITH HORIZONTAL PLL

PDF	52 Pages

Scroll/Zoom	100%

nhà sản xuất	TI [Texas Instruments]

Trang chủ	http://www.ti.com

Logo

18 / 52 page

www.ti.com

TVP7002

SLES206 – MAY 2007

If activity is not detected on either the HSYNC input or the VSYNC input, the host processor should assume that

the PC graphics input is configured as a standard 3-wire interface. In this case, the TVP7002 is automatically

configured for a SOG input.

VSYNC Input

HSYNC Input

PC Graphics

Activity Detect

Input Type

5 wire (default)

Undefined (assume 5 wire)

4 wire

3 wire

The activity detection status for the VSYNC and HSYNC inputs is written to the I2C status register at subaddress

14h.

NOTE:

Pin 13 of a standard 15-pin VGA video connect can be either a horizontal sync

(HSYNC) or a composite sync (CSYNC).

NOTE:

For component video inputs, the active HSYNC and VSYNC should always be

derived from the selected SOG input. This can most easily be ensured by setting the

AHSO, AVSO, AHSS and AVSS bit fields in register 0Eh to logic 1.

NOTE:

For proper operation when separate HSYNC and VSYNC inputs are used, the

leading edge of VSYNC must not be presicely aligned with the leading edged of

HSYNC. A simple RC delay circuit will provide adequate delay in most applications.

Figure 5. Sync Processing

Submit Documentation Feedback

TVP7002PZP bảng dữ liệu(PDF) 18 Page - Texas Instruments