UPD6P9 datasheet(43/73 Pages) RENESAS

43 / 73 page

µPD67, 67A, 68, 68A, 69

Data Sheet U14935EJ2V1DS

9.4 Accumulator Manipulation Instructions

ANL A, R0n

ANL A, R1n

<1> Instruction code:

1 101 R4 0R3 R2 R1 R0

<2> Cycle count:

<3> Function:

(A)

← (A) (Rmn) m = 0, 1 n = 0 to F

← A3 • Rmn3

The accumulator contents and the register Rmn contents are ANDed and the results are entered in the

accumulator.

ANL A, @R0H

ANL A, @R0L

<1> Instruction code:

1 101 0/1 1000 0

<2> Cycle count:

<3> Function:

(A)

← (A) ((P13), (R0))7-4 (in the case of ANL A, @R0H)

← A3 • ROM7

(A)

← (A) ((P13), (R0))3-0 (in the case of ANL A, @R0L)

← A3 • ROM3

The accumulator contents and the program memory contents specified by the control register P13 and

If H is specified, b7, b6, b5 and b4 take effect. If L is specified, b3, b2, b1 and b0 take effect.

• Program memory (ROM) organization

ANL A, #data4

<1> Instruction code:

1 10111000 1

0 00000 d3 d2 d1 d0

<2> Cycle count:

<3> Function:

(A)

← (A) data4

← A3 • data43

The accumulator contents and the immediate data are ANDed and the results are entered in the

accumulator.

↓

Valid bits at the time of accumulator manipulation

UPD6P9 bảng dữ liệu(PDF) 43 Page - Renesas Technology Corp

UPD6P9 bảng dữ liệu(HTML) 43 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73

bảng dữ liệu tải về

Link URL