User manual

5

Revision 1.1

2020-09-29

EVAL-M1-IM240-A user manual

iMOTION™ modular application design kit

Introduction

1

Introduction

The EVAL-M1-IM240-A evaluation board is a part of the iMOTION™ modular application design Kit for drives

(iMOTION™ MADK).

The MADK-platform is intended to use various power stages with different control boards. These boards can

easily be interfaced through the 20-pin iMOTION™ MADK-M1 interface connector.

This evaluation board is designed to give comprehensible solutions of a power stage based on the Infineon's

CIPOS™ Micro intelligent power module (IPM). The board is equipped with all assembly groups for sensor less

field oriented control (FOC). It provides a single-phase AC-connector, rectifier, DC-link and 3-phase output for

power. It contains emitter-shunts for current sensing and a voltage divider for DC-link voltage measurement.

The EVAL-M1-IM240-A evaluation board is available through regular Infineon distribution partners as well as on

Infineon's website. The features of this board are described in the design feature chapter of this document,

whereas the remaining paragraphs provide information to enable the customers to copy, modify and qualify

the design for production according to their own specific requirements.

Environmental conditions were considered in the design of the EVAL-M1-IM240-A. The design was tested as

described in this document but not qualified regarding safety requirements or manufacturing and operation

over the whole operating temperature range or lifetime. The boards provided by Infineon are subject to

functional testing only.

Evaluation boards are not subject to the same procedures as regular products regarding returned material

analysis (RMA), process change notification (PCN) and product discontinuation (PD). Evaluation boards are

intended to be used under laboratory conditions by specialists only.

M

EMI Filter

& Soft

Power Up

Circuit

HVIC

MADK-M1 connector

Power

Supply

Line

Neutral

15V

Itrip

PWM

Figure 1

The block diagram of the EVAL-M1-IM240-A evaluation-board

Figure 1 shows the evaluation board EVAL-M1-IM240-A. Although this board is compatible with on surface

mount as well as through whole CIPOS™ Micro modules. This document explains the features and details of this

board in combination with CIPOS™ Micro IM240-M6Z1B and IM240-M6Y1B. The only difference between these

modules is the package type. IM240-M6Z1B is SOP23 package. IM240-M6Y1B is DIP23 package.