STM32WB10CC datasheet(10/110 Pages) STMICROELECTRONICS

10 / 110 page

Description

STM32WB10CC

10/110

DS13259 Rev 2

Description

The STM32WB10CC multiprotocol wireless and ultra-low-power device embeds a powerful

and ultra-low-power radio compliant with the Bluetooth® Low Energy SIG specification 5.2.

It contains a dedicated Arm® Cortex®-M0+ for performing all the real-time low layer

operation.

The device is designed to be extremely low-power and is based on the high-performance

Arm® Cortex®-M4 32-bit RISC core operating at a frequency of up to 64 MHz. This core

features a Floating point unit (FPU) single precision that supports all Arm®

single-precision data-processing instructions and data types. It also implements a full set of

DSP instructions and a memory protection unit (MPU) that enhances application security.

Enhanced inter-processor communication is provided by the IPCC with six bidirectional

channels. The HSEM provides hardware semaphores used to share common resources

between the two processors.

The device embeds high-speed memories (320 Kbyte of Flash memory, 48 Kbytes of

SRAM) and an extensive range of enhanced I/Os and peripherals.

Direct data transfer between memory and peripherals and from memory to memory is

supported by seven DMA channels with a full flexible channel mapping by the DMAMUX

peripheral.

The device features several mechanisms for embedded Flash memory and SRAM: readout

protection, write protection and proprietary code readout protection. Portions of the memory

can be secured for Cortex® -M0+ exclusive access.

The AES encryption engine, PKA and RNG enable upper layer cryptography.

The device offers a fast 12-bit ADC.

The device embeds a low-power RTC, one advanced 16-bit timer, one general-purpose



32-bit timer, and two 16-bit low-power timers.

In addition, up to three capacitive sensing channels are available.

The STM32WB10CC also features standard and advanced communication interfaces,

namely one USART (ISO 7816, IrDA, Modbus and Smartcard mode), one I2C

(SMBus/PMBus), one SPI up to 32 MHz.

The STM32WB10CC operates in the -10 to +85 °C (+105 °C junction) temperature range

from a 2.0 to 3.6 V power supply. A comprehensive set of power-saving modes enables the

design of low-power applications.

The device includes independent power supplies for analog input for ADC.

A VBAT dedicated supply allows the device to back up the LSE 32.768 kHz oscillator, the

RTC and the backup registers, thus enabling the STM32WB10CC to supply these functions

even if the main VDD is not present through a CR2032-like battery, a Supercap or a small

rechargeable battery.

The STM32WB10CC is available in a 48-pin UFQFPN package.

STM32WB10CC bảng dữ liệu(PDF) 10 Page - STMicroelectronics

STM32WB10CC bảng dữ liệu(HTML) 10 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL