Note: This tutorial assumes you are using the latest stable version of the Arduino IDE on your desktop. If this

is your first time using Arduino, please review our tutorial on installing the Arduino IDE. If you have not

previously installed an Arduino library, please check out our installation guide.

Installing Arduino

If you haven't used the Arduino IDE before, head on over to our Installing the Arduino IDE tutorial to get set up:

Getting the Arduino Library

To make Configuration and start using your Cryptographic Co-processor, we have written an Arduino Library. It

currently supports only the Artemis board family. This is because some of the commands to the Co-processor

require a larger I2C buffer. You have two options to install this library:

Use the library manager or install in the Arduino IDE

We recommend using the library manager to tool within the Arduino IDE (Sketch > Include Library >

Manage Libraries...). In the Library Manager, search for Sparkfun_Cryptographic. For help installing

the library, check out our How to Install an Arduino Library tutorial.

Installing Arduino IDE

MARCH 26, 2013

A step-by-step guide to installing and testing the Arduino software on Windows,

Mac, and Linux.