MXT1664T3-ABESSQTP datasheet(55/98 Pages) MICROCHIP

55 / 98 page

MXT1664T3 2.0

 2018 Microchip Technology Inc.

DS40002054A-page 55

FIGURE 10-14:

SEND AUTO-RETURN – EXAMPLE SEQUENCE

10.4.3

START DEBUG MONITORING

This command instructs the device to return debug-monitoring data packets using the debug port, if this feature has

been enabled in the Command Processor T6 object.

The command packet has the format given in Figure 10-15.

FIGURE 10-15:

START DEBUG MONITORING – COMMAND PACKET FORMAT

In Figure 10-15:

• Rpt ID can be either 0x01 or 0x02 (see Table 10-3 on page 50). The main difference is that a USB report ID of

0x01 will terminate any currently enabled auto-return mode (see Section 10.4.2 “Send Auto-return Messages”).

• Command ID is the command ID to start debug monitoring (0xE1).

The response packet has the format given in Figure 10-16 on page 56. Note that the USB report ID will be the same as

that used in the command packet.

Reserved

Null

Rpt ID

Send Auto-return Command

Response From Device

Read Message Data

Send Null Command To Terminate

Rpt ID

0xFA

0x00

0x02

0xC0

0x1C

0x1A

0x1E

0x06

0x4F

0x10

0x00

Message Data

(Padded by Zeros to 60 Bytes)

Message

Report ID

Rpt ID

0xFA

0x00

0x11

0x03

0x1C

0x1A

0x1C

ID Bytes

Rpt ID

0x88

0x00

Command

Reserved Bytes

(62 Bytes)

Reserved Bytes

(62 Bytes)

Reserved Bytes

(62 Bytes)

0x00

Rpt ID

0x88

Command

Received

0x00

...

0xE1

Command

Rpt ID

Reserved Bytes

(62 Bytes)

0x00

...

MXT1664T3-ABESSQTP bảng dữ liệu(PDF) 55 Page - Microchip Technology

MXT1664T3-ABESSQTP bảng dữ liệu(HTML) 55 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98

bảng dữ liệu tải về

Link URL