| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
AR0134CSSC00SUEAD bảng dữ liệu(PDF) 19 Page - ON Semiconductor |
|
|
|||||||||||||||||||||||||||||
AR0134CSSC00SUEAD bảng dữ liệu(HTML) 19 Page - ON Semiconductor |
|
19 / 29 page ![]() AR0134CS www.onsemi.com 19 Table 15. STANDBY CURRENT CONSUMPTION (Analog − VAA + VAA_PIX + VDD_PLL; Digital − VDD + VDD_IO; TA = 25°C) Definition Condition Min Typ Max Unit Hard Standby (Clock Off, Driven Low) Analog, 2.8 V – 3 15 mA Digital, 1.8 V – 25 80 mA Hard Standby (Clock On, EXTCLK = 20 MHz) Analog, 2.8 V – 12 25 mA Digital, 1.8 V – 1.1 1.7 mA Soft Standby (Clock Off, Driven Low) Analog, 2.8 V – 3 15 mA Digital, 1.8 V – 25 80 mA Soft Standby (Clock On, EXTCLK = 20 MHz) Analog, 2.8 V – 12 25 mA Digital, 1.8 V – 1.1 1.7 mA HiSPi Electrical Specifications The ON Semiconductor AR0134CS sensor supports SLVS mode only, and does not have a DLL for timing adjustments. Refer to the High-Speed Serial Pixel (HiSPi) Interface Physical Layer Specification v2.00.00 for electrical definitions, specifications, and timing information. The VDD_SLVS supply in this data sheet corresponds to VDD_TX in the HiSPi Physical Layer Specification. Similarly, VDD is equivalent to VDD_HiSPi as referenced in the specification. The HiSPi transmitter electrical specifications are listed at 700 MHz. Table 16. INPUT VOLTAGE AND CURRENT (HiSPi POWER SUPPLY 0.4 V) (Measurement Conditions: Max Freq. 700 MHz) Symbol Parameter Min Typ Max Unit IDD_SLVS Supply Current (PWRHiSPi) (Driving 100 W Load) – 10 15 mA VCMD HiSPi Common Mode Voltage (Driving 100 W Load) VDD_SLVS × 0.45 VDD_SLVS/2 VDD_SLVS × 0.55 V |VOD| HiSPi Differential Output Voltage (Driving 100 W Load) VDD_SLVS × 0.36 VDD_SLVS/2 VDD_SLVS × 0.64 V DVCM Change in VCM between Logic 1 and 0 − − 25 mV |VOD| Change in |VOD| between Logic 1 and 0 − − 25 mV NM VOD Noise Margin – − 30 % | DVCM| Difference in VCM between any Two Channels − − 50 mV | DVOD| Difference in VOD between any Two Channels − − 100 mV DVCM_ac Common-mode AC Voltage (pk) without VCM Cap Termina- tion − − 50 mV DVCM_ac Common-mode AC Voltage (pk) with VCM Cap Termination − − 30 mV VOD_ac Max Overshoot Peak |VOD| − − 1.3 × |VOD| V Vdiff_pkpk Max Overshoot Vdiff pk-pk − − 2.6 × |VOD| V Veye Eye Height 1.4 × VOD − − Ro Single-ended Output Impedance 35 50 70 W DRo Output Impedance Mismatch − − 20 % |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |