| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
ST95HF bảng dữ liệu(PDF) 44 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
ST95HF bảng dữ liệu(HTML) 44 Page - STMicroelectronics |
|
44 / 93 page ![]() Commands ST95HF 44/93 DocID025630 Rev 4 Load Modulation Index and Demodulator Sensitivity parameters for Card Emulation mode The default value of these parameters (Table 35) is set by the PROTOCOLSELECT command, but they can be overwritten using the Write Register (WRREG) command (0x09). Table 33 and Table 34 list possible values for the Load Modulation Index and Demodulator Sensitivity parameters respectively. This new configuration is valid until a new PROTOCOLSELECT or Write Register (of register ACC_A) command is executed. Register values are cleared at power off. Table 29. WRREG command description (Modulation Index and Receiver Gain) Direction Data Comments Example Host to ST95HF 0x09 Command code >>>0x090468010113 Update ARC_B value to 0x13 >>>0x0903680001 Set Analog Register Index to 0x01 (ARC_B) (1) 1. This command must be executed before reading the ARC_B register (0x0803690100). 0x03 or 0x04 Length of data 0x68 Analog Register Configuration address index 0x00 or 0x01 Flag Increment address or not after Write command 0x01 Index pointing to the Modulation Index and Receiver Gain values in the ARC_B register (0x01) (see Section 5.11.1) 0xXX New value for Modulation Index and Receiver Gain nibbles (see Section 5.11.1) ST95HF to Host 0x00 Result code <<<0x0000 Register written 0x00 Length of data (= RegCount) Table 30. WRREG command description (Load Modulation Index and Demodulator Sensitivity) Direction Data Comments Example Host to ST95HF 0x09 Command code >>>0x0903680004 Set Analog Register Index to 0x04 (ACC_A) (1) >>>0x090468010425 Update ACC_A to 0x25 0x03 or 0x04 Length of data 0x68 Analog Register Configuration address index 0x00 or 0x01 Flag Increment address or not after Write command 0x04 Index pointing to the Demodulator Sensitivity and Load Modulation values in ACC_A register (0x04) (see Section 5.11.1) 0xXX New value for Demodulator Sensitivity and Load Modulation (see Section 5.11.1) |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |