| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
MT9072AB bảng dữ liệu(PDF) 69 Page - Zarlink Semiconductor Inc |
|
|
|||||||||||||||||||||||||||||
MT9072AB bảng dữ liệu(HTML) 69 Page - Zarlink Semiconductor Inc |
|
69 / 275 page ![]() MT9072 Data Sheet 69 Zarlink Semiconductor Inc. 8.2.3 E1 Common Channel Signaling (CCS) Transmit from ST-BUS CSTi and DSTi to PCM30 The CSIG control bit (register address Y03) must be set to one for Common Channel signaling (CCS) operation. CCS on the transmit PCM30 link (bit positions one to eight of timeslots 15, 16 and/or 31 of every frame) may be sourced from the ST-BUS DSTi stream or from the ST-BUS CSTi stream. If the TS15E, TS16E & TS31E control bits (register address Y06) are zero, the transmit data will be sourced from the ST-BUS DSTi stream timeslots 15, 16 and 31, if these bits are one, then the signaling data will be sourced from the ST-BUS CSTi stream. Note that any combination of the TS15E, TS16E & TS31E control bits (register address Y06) may be enabled. The CSTi source timeslots for the PCM30 timeslot 15, 16 and 31, are determined respectively by the 15C4-15C0, 16C4-31C0 and 31C4-31C0 (register address Y07) programming bits. Table 27 shows the detailed bit mapping of CSTi timeslots to transmit PCM30 frames. Table 28 shows the detailed bit mapping of DSTi timeslots to transmit PCM30 frames. ST-BUS CSTi PCM30 Transmit CRC-4 Frame Timeslot Data Bits (B7-B0) Timeslot CRC-4 Frame Data Bits (B1-B8) all Any one of 32 n + m(0 to 31) P1, P2, P3, P4, P5, P6, P7, P8 15 all P1, P2, P3, P4, P5, P6, P7, P8 all Any one of 32 n + m(0 to 31) P1, P2, P3, P4, P5, P6, P7, P8 16 all P1, P2, P3, P4, P5, P6, P7, P8 all Any one of 32 n + m(0 to 31) P1, P2, P3, P4, P5, P6, P7, P8 31 all P1, P2, P3, P4, P5, P6, P7, P8 Note 1. For 2.048 Mbit/s operation, m=1 and n=0. Note 2. For 8.192 Mbit/s operation, m=4 and n =0,1,2,3 where n corresponds to the framer number (i.e., n=0=framer 0... n=3= framer 3) Note 3. For these functions to be valid, CCS mode must be selected (CSIG=1 register address Y03) and CSTi ST-BUS mode must be selected (TS15E=1, TS16E=1 & TS31E=1 register address Y06) and the preferred source CSTi timeslot should be selected (15C4-0, 16C4-0 & 31C4-0 register address Y07). Table 27 - Transmit PCM30 CCS from ST-BUS 2.048 Mbit/s or 8.192 Mbit/s CSTi (E1) ST-BUS DSTi PCM30 Transmit CRC-4 Frame Timeslot Data Bits (B7-B0) Timeslot CRC-4 Frame Data Bits (B1-B8) all n + m(15) P1, P2, P3, P4, P5, P6, P7, P8 15 all P1, P2, P3, P4, P5, P6, P7, P8 all n + m(16) P1, P2, P3, P4, P5, P6, P7, P8 16 all P1, P2, P3, P4, P5, P6, P7, P8 all n + m(31) P1, P2, P3, P4, P5, P6, P7, P8 31 all P1, P2, P3, P4, P5, P6, P7, P8 Note 1. For 2.048 Mbit/s operation, m=1 and n=0. Note 2. For 8.192 Mbit/s operation, m=4 and n =0,1,2,3 where n corresponds to the framer number (i.e., n=0=framer 0... n=3= framer 3). Note 3. For these functions to be valid, CCS mode must be selected (CSIG=1 register address Y03), and DSTi ST-BUS mode must be selected (TS15E=0, TS16E=0 & TS31E=0 register address Y06). Table 28 - Transmit PCM30 CCS from ST-BUS 2.048 Mbit/s or 8.192 Mbit/s DSTi (E1) |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |